Sensor Watch 0.0.2
A board replacement for the classic Casio F-91W wristwatch, powered by a Microchip SAM L22 microcontroller.
Loading...
Searching...
No Matches
watch_gpio.h
1/*
2 * MIT License
3 *
4 * Copyright (c) 2020 Joey Castillo
5 *
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
12 *
13 * The above copyright notice and this permission notice shall be included in all
14 * copies or substantial portions of the Software.
15 *
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
19 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
22 * SOFTWARE.
23 */
24#ifndef _WATCH_GPIO_H_INCLUDED
25#define _WATCH_GPIO_H_INCLUDED
27
28#include "watch.h"
29
34
37void watch_enable_digital_input(const uint8_t pin);
38
42void watch_disable_digital_input(const uint8_t pin);
43
47void watch_enable_pull_up(const uint8_t pin);
48
52void watch_enable_pull_down(const uint8_t pin);
53
58bool watch_get_pin_level(const uint8_t pin);
59
63void watch_enable_digital_output(const uint8_t pin);
64
68void watch_disable_digital_output(const uint8_t pin);
69
74void watch_set_pin_level(const uint8_t pin, const bool level);
76#endif
void watch_disable_digital_output(const uint8_t pin)
Disables digital output on the selected pin.
void watch_set_pin_level(const uint8_t pin, const bool level)
Sets the level of the selected pin.
void watch_enable_pull_up(const uint8_t pin)
Enables a pull-up resistor on the selected pin.
void watch_enable_digital_input(const uint8_t pin)
Configures the selected pin for digital input.
bool watch_get_pin_level(const uint8_t pin)
Gets the level of the selected pin.
void watch_disable_digital_input(const uint8_t pin)
Disables any digital input, along with any pull-up or pull-down configuration.
void watch_enable_pull_down(const uint8_t pin)
Enables a pull-down resistor on the selected pin.
void watch_enable_digital_output(const uint8_t pin)
Configures the selected pin for digital output.